Mirrored Sheet Fab Guide

R E D C O™   M I R R O R E D   A C R Y L I C   S H E E T

F A B R I C A T I O N   &   M A C H I N I N G   R E C O M M E N D A T I O N S

  • Redco™ Mirrored Acrylic Sheet comes in a clear, gold mirror as well as a two-way mirror option for security purposes.
  • Redco™ Mirrored Acrylic Sheet is easily machined with a table saw or with a jig saw/scroll saw, resulting in an easy at home project for the do it yourself fabricator. Another advantage is its lighter than glass and won’t shatter if dropped.
  • To use in replacement of a glass mirror 1/4″ thick sheet will provide the best desired result, thinner gauges tend to create a “fun-house” effect.
  • If your application requires you to bend or curve the material and a proper reflection is not required 1/16″ thick sheet works well.

IMPORTANT:

Temperature changes can cause Redco™ Mirrored Acrylic Sheet to expand and contract which can result in the “fun house” effect once again, by leaving some room for this change, (approximately +1/8″) should prevent the effect depending on the type of material that is surrounding the acrylic sheet.