High Performance
Plastics

pdf-button photo-album material-properties-msds

high-performance

Redwood Plastics Distributes a wide variety of plastic grades to handle the most challenging applications.Below are just a few of the many high performance plastics that are available. Please contact us with your application specifications.

REDCO™ PEEK

Redco™ PEEK is high temperature resistant with excellent chemical and fatigue resistance as well as thermal stability. It exhibits superior mechanical and electrical properties, with a maximum continuous working temperature of 480°F. Redco™ PEEK has excellent retention of mechanical properties up to 570° F in a steam or high-pressure water environment.

  • Impact Resistant
  • High Tensile Strength
  • Excellent Flexural Characteristics
  • Temperature Resistant

Redco™ PEEK possesses superior chemical resistance allowing it to work effectively as a metal replacement in harsh environments. It is also inert to all common solvents and resists a wide range of organic and inorganic liquids, when extensive machining is required, a secondary annealing process should be considered.

peek-rollers

Redco™ PEEK is an excellent material for a wide spectrum of applications where thermal, chemical, and combustion properties are critical to performance. Especially significant, in this regard, is Redco™ PEEK’s ability to retain flexural and tensile properties at very high temperatures; in excess of 250°C (482°F).

The addition of glass fiber and carbon fiber reinforcements enhances the mechanical and thermal properties of the basic PEEK material.

Redco™ PEEK is used in automotive engine parts, aerospace components, earth moving equipment, semi-conductor parts, wire and cable coating, etc.

 

 

REDCO™ ULTEM®*

Redco™ Ultem has a continuous use temperature of 332°F. It is used widely in the electronic’s market because of its good arc resistance and dielectric constant. It is also a prime material for medical applications because of its ability to withstand multiple autoclave steam sterilizations.*Ultem is a registered trademark of G.E. Plastics.

 

 

REDCO™ Polysulfone

Redco™ Polysulfone is a tough, rigid, high strength transparent thermoplastic which maintains its properties over a wide temperature range from -150°F to above 300°F. Redco™ Polysulfone is also FDA Approved.

Polysulfone has very high dimensional stability and very high resistance to mineral acids, alkali, and salt solutions, even at elevated temperatures under moderate stress levels.

 

 

Other Materials Available:

TORLON®

PPS (Polypheylene Sulfide)

PBI (Polybenzimidazole)

RADEL

PEEK®

ERTALYTE-TX

FLUOROSINT®

DURATRON®

CELAZOLE

SEMITRON®

PC 1000 POLYCARBONATE

PVDF

KYNAR®

VICTREX®

KYTEC