[email protected] CALL 833 381 1195
Select Page

Three Preparation Steps For Part Design

So, you have a part you want made out of plastic (or rubber). You have a drawing, maybe a CAD file. You know what the part needs to do. What now? This is the stage where you need to make the leap from idea to practical. To get the part finalized, material specified,...

Plastic Angle

Out of the many parts and plastic profiles requested of Redwood Plastics and Rubber, plastic angle keeps coming up. This is typically plastic bent at a 90 degree angle halfway. This is primarily used for protection of a surface or object if machined out of UHMW or...

Space Shuttle Challenger and Rubber: A Cautionary Case Study

The space shuttle “Challenger” explosion in 1986 was a seminal moment for many Americans. The launch was shown on live TV and there was a high amount of interest in teacher Christa McAullife being on the flight. The shuttle exploded 73 seconds into the...

Industry Spotlight: Aggregate

The aggregate industry is defined by the processing and movement of extremely abrasive wet or dry materials, usually by a network of conveyors. This process may also include equipment to pulverize, shape, clean, or otherwise sort the aggregrates. Due to the abrasive...

Not Sure What Rubber You Need? Start Here

Ordering rubber products is easy enough when you know exactly what you need and a defined spec is available. However, what if that information has been lost? The answer is to start at “square one” and work your way up to an optimal solution. To that end...