Sprockets
Keeping Equipment Moving
Redco™ Sprockets were designed for durability and precision to increase the life of your equipment and decrease the noise in your facility. Our sprockets will reduce downtime and increase production at a fraction of the cost of traditional steel sprockets.
We offer three standard types of sprockets to keep your equipment efficiently moving in even the most demanding conditions. Many custom sizes and configurations can be developed in-house to suit a wide variety of light, medium, and heavy-duty applications.
Redco™ Sprockets Features
Long-lasting design
Increased production
Easy installation
Economical price
Reduced noise
Excellent abrasion & wear resistance
Redco™ Sprockets Product Line
Redco™ Bolt Together Idle Sprockets
Redco™ 750 bolt together idler sprockets are a quick and easy fix to sprocket replacement frustrations, particularly in the middle of a shaft. Redco™ 750 sprockets are lightweight, reduce noise levels, and will reduce or eliminate wear on the barrels and side links of the chain.
Redco™ 750 Sprockets
Increases production and reduces wear on equipment. Redco 750 has excellent abrasion and wear resistance with high impact values. Not only is Redco 750 much less expensive than steel, but it also drastically reduces noise levels and has a longer wear life.
- No chain wear and no shaft wear
- Kraftmill pulp safe
- Available for 81X chain (but will work with H-78).
- Compatible with split hubs and a-plates
- All hub bores are finished to size with running clearances and grease fitting
- Fits on any a-plate from 9 to 15 tooth.
Redco™ Drive Sprockets
Redco Drive Sprockets incorporates a cast iron hub for strength in combination with Redco 750 A Plate. Designed for light to medium duty applications it will perform well in areas such as transfers and most planer applications.
- Split for easy installation.
- Makes use of the same A-Plates and the Redco Idler units.
- You only need to replace the A-Plate when the need arises.
- Very economical.
Redco™ Snap It Sprockets
Redco™ Snap It Sprocket requires no bolts and is easy and quick to assemble; simply match the arrows on the a-plate and snap together. All the benefits of our Redco 750 sprocket but no bolts are required for installation.
- Reduce Maintenance Costs
- Easy to Install
- Increase Production
- Interchangeable design to reduce your inventory levels
- Much less expensive than split steel sprockets
- Reduce Noise & Equipment Wear
Redco™ 750 Polyurethane Mill Chain Sprockets
81X Pitch 2.609 (Also fits H-78)
- Designed for sawmill and planermill use.
- Split for simple installation.
- Reduces chain wear and noise.
- Elastomeric characteristics make these the best plastic sprockets for industrial use.
- Interchangeable with standard steel sprockets.
- Requires no bushing or bearing.