 |
|
 |
 |
|
REDCO RUBBER  Redco™ Rubber materials are the newest addition to the Redco™ group of products. In partenership with our manufacturing division we have a wide variety of processing techniques available to mold, extrude and cast to best suit your application. Products Available:
SPECIALTY ROLLER COVERING
Pulp Mill rollers with a full range of hardness’s. Glue Spreaders, Paper Rolls, Winders and every other type of industrial rollers of all descriptions from 2" long up to 25 feet long. Your roller covering is ensured to have consistent quality every time.
top
SHEET RUBBER
Natural (NR)
Superior tensile strength, tear and abrasion resistance, rebound elasticity (snap), flexibility and adhesion to fabric and metal.
Styrene-Butadiene (SBR)
Excellent tensile strength, abrasion resistance and flexibility.
Neoprene (CR)
Very good resilience to weather, ozone, natural aging, and to alkalis and acids. Good resistance to flame, abrasion, and flex cracking. Commercial Grade Satin Finish
Industrial Grade Plate Finish
Nitrile (NBR)
Superior resistance to petroleum-based hydraulic fluids; wide range of service temperatures very good resistance to alkalies and acids.
Butyl (llR)
Outstanding impermeability to gases and vapour; very good resistance to heat, oxygen, ozone and sunlight; excellent resistance to water and steam.
Ethylene-Propylene-Diene (EPDM)
Excellent resistance to heat, ozone and sunlight; very good flexibility at low temperatures; superior resistance to water and steam.
Red Sheet Packing
Commercial blend SBR for industrial gaskets.
Hypalon
Superior resistance to weather, ozone, sunlight and oxidation; excellent resistance to alkalies and acids.
Chute & Launder Lining
Chute lining service can be specified using any standard sheet rubber compound. C.I. Packing
A fabric reinforced sheet for use in applications where the stresses are generally static in nature. Diaphragm Sheet
A flexible membrane with low permeability to fluids or gases. Capable of permitting relative motion between a stationary and a moving member while maintaining a separation of the two media on either side and may maintain a pressure differential between the two media. 
Profiles from thermal plastics to rubber compounds - with flexibility to suit your needs. Marine Fenders to Glass Setting Blocks – there is no job too big or small. Feel free to contact us and discuss your requirements – or ask about our more common stocked profiles.
RUBBER LININGS & FABRICATE PARTS
Expansion Joints, Custom Hose Building, Hump Hoses, Concrete Socks, Sleeves, Tank Lining, Pipe Lining, Pulley Covering, Dual Hardness Scrapers from a wide range of products to best suit your application.
MOLDED PARTS
Parts made from all types of rubber – specific to your needs. Bridge Bearing Pads, Vibration Isolation Parts, Impact Pads, Truck & Trailer Parts, Tarp Straps, Seals and Bumpers and more. In-house mold making and design and much more. Please call to discuss your application.
|
|
|
|
 |
|
|
|
|
